Spindle Bearings

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Spindle Bearings [Re: OOP'S] #674065 12/06/05 04:05 AM

Joined: Oct 2004

Posts: 1,270

Long Island, NY

willzrunna96 Offline

Body Damage is Cool

there are still the regular brass bushings but they redesigned the for cold climate trucks to use needle bearings so they dont moan when its cold. i priced them out and the inner was 34 and outer was 20

91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders

Entire Thread
Subject	Posted By	Posted
Spindle Bearings	TyYota	12/06/05 03:09 AM
Re: Spindle Bearings	OOP'S	12/06/05 03:28 AM
Re: Spindle Bearings	willzrunna96	12/06/05 04:05 AM
Re: Spindle Bearings	Red_Chili	12/06/05 03:59 PM
Re: Spindle Bearings	TyYota	12/06/05 05:40 PM
Re: Spindle Bearings	Red_Chili	12/07/05 04:27 PM
Re: Spindle Bearings	Anonymous	12/07/05 04:43 AM
Re: Spindle Bearings	Red_Chili	12/07/05 04:26 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.705s Queries: 16 (3.703s) Memory: 0.6060 MB (Peak: 0.6390 MB) Data Comp: Off Server Time: 2026-07-15 16:54:25 UTC
Valid HTML 5 and Valid CSS