2.7L Header??

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.7L Header?? [Re: Greg_Canada] #674371 12/09/05 01:12 AM

Joined: Sep 2003

Posts: 187

Washington

krickett686 Offline

Wheeler

I have the Downey header in my 1998 Tacoma 2.7l. I would have gone with the LC Engineering header if i could do it all over again. The Downey header was a ***** to install and the collector didn't quite lineup with the exhaust pipe when i installed it. I've heard much better things about the LC Engineering header.

-Ryan
ryan@4wdtoyota.com

Entire Thread
Subject	Posted By	Posted
2.7L Header??	Anonymous	12/07/05 01:53 AM
Re: 2.7L Header??	TheAlchemist	12/07/05 02:07 AM
Re: 2.7L Header??	Anonymous	12/07/05 02:17 AM
Re: 2.7L Header??	Greg_Canada	12/08/05 03:53 PM
Re: 2.7L Header??	krickett686	12/09/05 01:12 AM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.603s Queries: 16 (3.601s) Memory: 0.5993 MB (Peak: 0.6322 MB) Data Comp: Off Server Time: 2026-06-19 07:10:45 UTC
Valid HTML 5 and Valid CSS