Quote
so the terminals on the late caps are male, like a chevy HEI cap? sounds like you could get a set of taylor wires and be fine there.


Well I guess boith styles are 'male' The older style uses the "open" looking prong on the wire end and plugs into a larger whole (5 or 6mm?) on the cap. I believe this is the HEI style wires as they would also fit over the little 'knobs' on chevy style distributors (I think). I bought a set of MSD wires thinking they were all the same even though the book said '86-91 only. Nice 8.5mm wires that were half the cost of OEM wires but they didn't fit and I had to take them back. <img src="/forums/images/graemlins/confused.gif" alt="" />

The ones I have use a small, narrow prong on the wire and plug into a small (~3mm) whole in the cap w/ the little plastic cap which snaps on soundly . Seems pretty propriatary to me.

Can't seem to eve find a pic of the new style. Here is the older style:
[Linked Image]

Last edited by Poor A$$ Stock '93; 12/09/05 01:40 AM.