|
|
|
|
Re: cam seal
[Re: Digital_Aardvark]
#676226
12/12/05 07:23 AM
|
Joined: Apr 2000
Posts: 4,230
Roll Me Over
|
Been losing about a quart of oil a week for the last two weeks <img src="/forums/images/graemlins/shiner.gif" alt="" /> At first I thought it was a valve cover gasket, but I took the valve cover off and it looks good. I had the plastic cover off the timing belt and the belt seemed to have a little oil on it. It also appears as if the oil is coming from the very front of the engine on the passenger side. Is it likely the seal? I'm going to order a new seal and timing belt tomorrow if it is. I need to get this done before I leave school for break while I still have access to the student garage. Do your self a favor while you have it open and get a new water pump!!!
David Fritzsche 1990 Ex-Cab V-6,5-speed, with a few mods 04.5 CTD Dodge 2500 Ram--Tow Rig Roseville, CA
"Serenity through Sobriety"
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.613s Queries: 16 (3.611s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-24 04:15:11 UTCValid HTML 5 and Valid CSS