I'm replacing my CV boots and I noticed those needle bearings in the back of the knuckle feel a bit gritty and I would like to repack them. I'm figuring I could just pop off the seal and clean out the bearings with brake cleaner then pack some grease into them and put a new seal on. Any one see any thing wrong with that?

1998 Honda Passport EXL V6 3.2L Auto SOTF 4WD
3" Calmini Lift w/ HD Track Bar, 32x11.5-16 Super Swamper SX, Aisins

[color:"blue"]http://www.CarDomain.com/ID/ProBMXer1313[/color]