Rust on a spindle

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rust on a spindle [Re: TexJeff87] #678423 12/19/05 10:12 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

A wire wheel won't scratch the spindle. You can also try steel wool or one of the synthetic abrasive pads. The other thing that works well is the CLR or LimeAway bathroom cleaner. Both are phosphoric acid-based, just like Naval Jelly and do the same thing.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Rust on a spindle	JWHnAtl	12/19/05 07:49 PM
Re: Rust on a spindle	OOP'S	12/19/05 08:03 PM
Re: Rust on a spindle	JWHnAtl	12/19/05 08:16 PM
Re: Rust on a spindle	Red_Chili	12/19/05 09:25 PM
Re: Rust on a spindle	TexJeff87	12/19/05 09:35 PM
Re: Rust on a spindle	4Crawler	12/19/05 10:12 PM
Re: Rust on a spindle	JWHnAtl	12/20/05 12:38 AM
Re: Rust on a spindle	4Crawler	12/20/05 01:27 AM
Re: Rust on a spindle	JWHnAtl	12/20/05 12:40 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.496s Queries: 16 (3.493s) Memory: 0.6118 MB (Peak: 0.6448 MB) Data Comp: Off Server Time: 2026-06-16 23:02:26 UTC
Valid HTML 5 and Valid CSS