Rust on a spindle

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rust on a spindle [Re: TexJeff87] #678425 12/20/05 12:40 AM

Joined: Dec 2003

Posts: 895

Georgia

JWHnAtl

Rock Warrior

<img src="/forums/images/graemlins/lol.gif" alt="" />

I know about naval lint, but not naval jelly! <img src="/forums/images/graemlins/ignore.gif" alt="" />

'89 3.0 4Rnr: Jacob's Electronics, K&N, CF Dual Frict, 4:56 w/ Truetracs, 33 BFG AT/KOs, Cascade Audio, Pro-Comp 4" susp & 2" body (previous owner)

I know, a lot of wasted time and money ... if I knew then what I know now....

Entire Thread
Subject	Posted By	Posted
Rust on a spindle	JWHnAtl	12/19/05 07:49 PM
Re: Rust on a spindle	OOP'S	12/19/05 08:03 PM
Re: Rust on a spindle	JWHnAtl	12/19/05 08:16 PM
Re: Rust on a spindle	Red_Chili	12/19/05 09:25 PM
Re: Rust on a spindle	TexJeff87	12/19/05 09:35 PM
Re: Rust on a spindle	4Crawler	12/19/05 10:12 PM
Re: Rust on a spindle	JWHnAtl	12/20/05 12:38 AM
Re: Rust on a spindle	4Crawler	12/20/05 01:27 AM
Re: Rust on a spindle	JWHnAtl	12/20/05 12:40 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.434s Queries: 16 (3.432s) Memory: 0.6104 MB (Peak: 0.6433 MB) Data Comp: Off Server Time: 2026-05-31 01:18:40 UTC
Valid HTML 5 and Valid CSS