Indy 4x Brake Line Installation

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Indy 4x Brake Line Installation [Re: langforg] #678861 12/21/05 05:33 AM

Joined: Mar 2004

Posts: 558

Prescott AZ USA

94redrodeo Offline

Rock Warrior

1. Make sure you use a line wrench
2. Do one at a time
3. Make sure to keep filling the resevoir.
4. Bleed brakes

94 Rodeo 3+3 lift Red)
95.5 Rodeo 1" Body lift Dana 44' front & rear 4.88 gears 35"s 176,000 miles Optima Yellow top InexAir Co2
front winch bumper custom rear bumper, Hella 500's
2004 Silverado duramax

Entire Thread
Subject	Posted By	Posted
Indy 4x Brake Line Installation	langforg	12/21/05 05:13 AM
Re: Indy 4x Brake Line Installation	94redrodeo	12/21/05 05:33 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.921s Queries: 16 (3.919s) Memory: 0.5925 MB (Peak: 0.6255 MB) Data Comp: Off Server Time: 2026-06-09 10:34:06 UTC
Valid HTML 5 and Valid CSS