|
|
|
|
 Re: 87 YJ 4.2L BA10 to AX15 swap
[Re: wyleone]
#678940
12/24/05 10:40 PM
|
Joined: Mar 2004
Posts: 2,398
Body Damage is Cool
|
Just from looking at pictures it appears the bolt pattern is different, Tranny to bellhousing. The AX 5 has a 1" 14 spline input shaft so the clutch would not swap. I thought the Jeep had a 207 Transfer case in it. Are you sure it's a 231? <img src="/forums/images/graemlins/cheers.gif" alt="" />
|
|
|
Re: 87 YJ 4.2L BA10 to AX15 swap
[Re: JeePete]
#678941
12/26/05 06:15 AM
|
Joined: Jun 2004
Posts: 1,904
OP
Body Damage is Cool
|
Yessireee, Says NP231J on the round ID plate on the back case half. It may not be original, I cannot vouch for what was in it OEM. I just know what is in it now.
|
|
|
Re: 87 YJ 4.2L BA10 to AX15 swap
[Re: wyleone]
#678942
12/27/05 05:00 PM
|
Joined: Mar 2004
Posts: 2,398
Body Damage is Cool
|
I figured you knew, I was under the impression all 87's with the PUjoe came with the 207. Bonus! <img src="/forums/images/graemlins/cheers.gif" alt="" />
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 16 (0.004s) Memory: 0.5978 MB (Peak: 0.6666 MB) Data Comp: Off Server Time: 2026-06-11 23:26:37 UTCValid HTML 5 and Valid CSS 
