Vacuum Hose Routing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Vacuum Hose Routing [Re: isensee] #680203 12/27/05 04:20 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

P/s hoses hook to the idle-up valve and intake. No in or out on them, just hook one side to the intake vacuum and the other side to the idle up valve (should have an RPM adjustmnent knob on it). The fender hoses may be for ADD, if you have that type of front axle:
- http://www.off-road.com/toyota/tech/add/index.htm

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Vacuum Hose Routing	isensee	12/27/05 04:11 AM
Re: Vacuum Hose Routing	4Crawler	12/27/05 04:20 AM
Re: Vacuum Hose Routing	Anonymous	12/27/05 06:20 PM
Re: Vacuum Hose Routing	Marc91runner	12/27/05 07:31 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.499s Queries: 16 (3.497s) Memory: 0.5995 MB (Peak: 0.6325 MB) Data Comp: Off Server Time: 2026-06-16 05:06:23 UTC
Valid HTML 5 and Valid CSS