Towards the end of last week my '96 LC80 starting having some electrical issues! For a day or two, the left turn signal lights (interior and exterior) would stay on while I was driving. Not full brightness, because when I turned on the left signal it would still flash. Then things changed again... The left lights would turn on when I stepped on the brake peddle. One would hope that it would end there, not so much! Soon after that I reallized that both my brake lights and turn signal fuses are now blowing. Great, so I have a short somewhere. My Haynes manual has the turn signal wiring diagram in it but no diagram for the brake light system and I am trying to see where they may overlap. Does anyone have this that they could scan and send to me or maybe fax to me.

I did do some trailer wiring this past summer and I am going to check that first to see if there is any corrosion or loose connections happening there, but I would like to prepare for that not being the case. Thank you!