weber snorkel

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: weber snorkel [Re: Jamez] #680795 12/30/05 01:13 AM

Joined: Jun 2004

Posts: 1,904

wyleone

Body Damage is Cool

I fashioned two brackets out of aluminum flat bar to mount from the factory Dakota mounting points and mounting tabs already located under it for the vacc cannister lines.
The bottom of the Dakota airbox countours the right inner fender quite well.

Last edited by wyleone; 12/30/05 01:15 AM.

Entire Thread
Subject	Posted By	Posted
weber snorkel	juggernaut	12/29/05 03:47 PM
Re: weber snorkel	DanWheeler	12/29/05 04:24 PM
Re: weber snorkel	wyleone	12/29/05 05:16 PM
Re: weber snorkel	DanWheeler	12/29/05 05:17 PM
Re: weber snorkel	wyleone	12/29/05 05:33 PM
Re: weber snorkel	Jamez	12/30/05 12:56 AM
Re: weber snorkel	wyleone	12/30/05 01:13 AM
Re: weber snorkel	juggernaut	01/31/06 03:05 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.490s Queries: 16 (3.488s) Memory: 0.6057 MB (Peak: 0.6387 MB) Data Comp: Off Server Time: 2026-06-03 15:09:47 UTC
Valid HTML 5 and Valid CSS