The factory spec in the 87 and 89 manual is 0 to .004", its in the manual tranny section, Looks like they forgot the spec in the auto section.

The 84 manual has a misprint, they call out 0 to .1 mm / 0 to .04"... Should be .004".

In case you missed it....

Spec from factory for the rear cover = [color:"red"] 0 to .1 mm / 0 to .004"[/color] Section 21, page 48 in the 1989 manual.

I knew I had seen this in my books before since I had checked it when putting my case together. You just need to know to look in the wrong section <img src="/forums/images/graemlins/confused.gif" alt="" />

We need to write an addendum to the manual, what sections to skip and when to jump to the wrong section. <img src="/forums/images/graemlins/cyclops.gif" alt="" />

Kevin