Hope this helps. I have the same bumper and winch on my 2000 Trooper.

Front of the truck

]http://community.webshots.com/photo/538451874/538451874MRkcxP#[/url]

Front of the bumper

http://community.webshots.com/photo/538451968/538451968ZlzmEz

Top of the bumper

http://community.webshots.com/photo/538451325/538451325Riytib

Right side of the mount

http://community.webshots.com/photo/538451411/538451411FuykRU

Bottom of the bumper. Top of the picture is the front of the bumper.

http://community.webshots.com/photo/538452003/538452003zDnHBD

Left side of the mount

http://community.webshots.com/photo/538452013/538452013bduWaf

Right side of the fairlane

http://community.webshots.com/photo/538451433/538451433bDlFnR

Left side of the fairlane

http://community.webshots.com/photo/538452362/538452362jrNNrs


OK, if you look at the front of the bumper on the mounting plate you will see 4 holes that are used to mount the winch. The winch itself has to be turned 90 deg., so the bottom of the winch is actually in front.

Arek

The mighty oak tree was once a little nut that held its ground.

2000 Trooper LS with TOD
ARB bumper, custom roof rack, 33" BFGoodrich AT, K&N, OME springs, Aisin hubs, Rancho 9000, WARN XD9000, Maxi-Kool Tranny Cooler, Optima Red,