Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Winch Mounting Point on ARB Bull Bar [Re: langforg] #681554 01/07/06 01:22 PM
Joined: Oct 2002
Posts: 201
DieselBob Offline
Wheeler
langforg

I have the ARB fitting instructions if you think that would help. To get everything to fit you need to drill new holes in the roller fairlead and rotate the winch ends.


Bob

"You can't expect to wield supreme executive power just 'cause some watery tart threw a sword at you."

02 Trooper S, TOD, Aisin Hubs, FJORD Blue, ARB 3444070 Winch Bar. Dueler A/T REVO LT265/75R16
Re: Winch Mounting Point on ARB Bull Bar [Re: DieselBob] #681555 01/07/06 05:24 PM
Joined: Oct 2003
Posts: 127
Sfinx Offline
Wheeler
Hope this helps. I have the same bumper and winch on my 2000 Trooper.

Front of the truck

]http://community.webshots.com/photo/538451874/538451874MRkcxP#[/url]

Front of the bumper

http://community.webshots.com/photo/538451968/538451968ZlzmEz

Top of the bumper

http://community.webshots.com/photo/538451325/538451325Riytib

Right side of the mount

http://community.webshots.com/photo/538451411/538451411FuykRU

Bottom of the bumper. Top of the picture is the front of the bumper.

http://community.webshots.com/photo/538452003/538452003zDnHBD

Left side of the mount

http://community.webshots.com/photo/538452013/538452013bduWaf

Right side of the fairlane

http://community.webshots.com/photo/538451433/538451433bDlFnR

Left side of the fairlane

http://community.webshots.com/photo/538452362/538452362jrNNrs


OK, if you look at the front of the bumper on the mounting plate you will see 4 holes that are used to mount the winch. The winch itself has to be turned 90 deg., so the bottom of the winch is actually in front.

Arek


The mighty oak tree was once a little nut that held its ground.

2000 Trooper LS with TOD
ARB bumper, custom roof rack, 33" BFGoodrich AT, K&N, OME springs, Aisin hubs, Rancho 9000, WARN XD9000, Maxi-Kool Tranny Cooler, Optima Red,

Re: Winch Mounting Point on ARB Bull Bar [Re: Sfinx] #681556 01/07/06 06:21 PM
Joined: Feb 2005
Posts: 169
langforg Offline OP
Wheeler
Thanks that is exactly what I was looking for.

Brd


95 Trooper,3in Lift,15x10 AR-23 Wheels, 33x12.50 BFG AT's, SuperWinch Hubs,Rock Sliders,Tie-Rod Shields,Cross-Drilled Brake Rotors,ARB Bull Bar...,looking for cheap winch.
Page 2 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 1.159s Queries: 16 (0.005s) Memory: 0.6006 MB (Peak: 0.6723 MB) Data Comp: Off Server Time: 2026-06-05 13:46:47 UTC
Valid HTML 5 and Valid CSS