The serial numbers you could run at the dealership I believe. Nope; they're simply etched 22R. Last carbie year was 87/88.
There is a cast date on the pax rear corner of the block, but you have to take the oil pan off to see it, and to me it's moot. [edit] EG, I picked up a 22RE L/B this summer, rebuilt; the cast date was '84, but all the hardware is correct.
Ex manifold for EFI has the 02 sensor mounted. I don't know if Kali carbs had them or not; maybe one of them here knows.
If the head is still on, take the valve cover off (those yahoos will just have to get over it <img src="/forums/images/graemlins/rolleyes.gif" alt="" />). On the pax side, an RE will have a closeout plate where the fuel pump for a carb config lives. NOW, if you look at your truck's head, you'll see a wheel(right term escapes me) that your fuel pump flipper rests on just in front of the cam gear. An EFI won't have that; it'll have a spacer instead. Only exception would be is if someone did an EFI conversion, and simply left it in there; it doesn't affect anything.
Guy you talked to is clueless. HOWEVER, if you're looking to do an EFI changeover, and he's got all the goodies, grab 'em,the ECU, and fender components as well. <img src="/forums/images/graemlins/notooth.gif" alt="" />
On the pax side, there is a fairly large threaded hole near the oil filter mount that's for a knock sensor. You won't see this on a carbie. Check your truck. Also, if the engine was yanked and the fuel filter bracket was left on, you'll see that too.
The long block itself will interchange, with exception to the +/- 84 years, as you already know. <img src="/forums/images/graemlins/cheers.gif" alt="" />
Last edited by kewlynx; 01/03/06 05:04 AM.