Q about threads for block port

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Q about threads for block port [Re: J94_4runner] #682821 01/05/06 06:03 AM

Joined: Apr 2000

Posts: 4,230

Roseville, CA, Gateway to the ...

OOP'S

Roll Me Over

They are Metric threads, you need to get an adapter like you use when you put on an aftermarket oil pressure gauge or find a place that sells metric brass fitings......

David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA

"Serenity through Sobriety"

Entire Thread
Subject	Posted By	Posted
Q about threads for block port	J94_4runner	01/05/06 04:37 AM
Re: Q about threads for block port	OOP'S	01/05/06 06:03 AM
Re: Q about threads for block port	J94_4runner	01/05/06 04:59 PM
Re: Q about threads for block port	4Crawler	01/05/06 06:38 PM
Re: Q about threads for block port	willzrunna96	01/05/06 07:16 PM
Re: Q about threads for block port	J94_4runner	01/05/06 10:06 PM
Re: Q about threads for block port	4Crawler	01/05/06 10:58 PM
Re: Q about threads for block port	benmlee	01/06/06 12:47 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.470s Queries: 16 (3.468s) Memory: 0.6078 MB (Peak: 0.6407 MB) Data Comp: Off Server Time: 2026-06-14 09:05:34 UTC
Valid HTML 5 and Valid CSS