Q about threads for block port

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Q about threads for block port [Re: J94_4runner] #682826 01/05/06 10:58 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

You could use something like this:
- http://www.amstreetrod.com/961503ERL.php4

An M10x1.0 to AN brake line adapter then add an AN cap to seal it off.

Or pickup up an M10x1.0 oil pressure or temperature sender and hook up a guage:
- http://egauges.com/eg_sType.asp

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Q about threads for block port	J94_4runner	01/05/06 04:37 AM
Re: Q about threads for block port	OOP'S	01/05/06 06:03 AM
Re: Q about threads for block port	J94_4runner	01/05/06 04:59 PM
Re: Q about threads for block port	4Crawler	01/05/06 06:38 PM
Re: Q about threads for block port	willzrunna96	01/05/06 07:16 PM
Re: Q about threads for block port	J94_4runner	01/05/06 10:06 PM
Re: Q about threads for block port	4Crawler	01/05/06 10:58 PM
Re: Q about threads for block port	benmlee	01/06/06 12:47 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.572s Queries: 16 (3.570s) Memory: 0.6095 MB (Peak: 0.6425 MB) Data Comp: Off Server Time: 2026-06-14 15:55:31 UTC
Valid HTML 5 and Valid CSS