Marlin's sloped rear spring hangers

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Marlin's sloped rear spring hangers [Re: 4Crawler] #684112 01/08/06 10:39 PM

Joined: Apr 2003

Posts: 31

Pine Valley,Ca

Panamint Charlie Offline

Getting the Wheeling Fever

Thanks Roger, Did you relocate the rear shackle mounts also?

The only problem with putting them where the marks are is that it's not a flat plane for them to sit on. It looks like stock mounts would work because of their design.

I'll take more measurements and see what I have to work with.

Here is the mounts I'm working with.
[Linked Image]

Entire Thread
Subject	Posted By	Posted
Marlin's sloped rear spring hangers	Panamint Charlie	01/08/06 09:50 PM
Re: Marlin's sloped rear spring hangers	4Crawler	01/08/06 10:07 PM
Re: Marlin's sloped rear spring hangers	Panamint Charlie	01/08/06 10:39 PM
Re: Marlin's sloped rear spring hangers	4Crawler	01/08/06 11:50 PM
Re: Marlin's sloped rear spring hangers	Panamint Charlie	01/09/06 12:30 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.797s Queries: 16 (3.795s) Memory: 0.6018 MB (Peak: 0.6348 MB) Data Comp: Off Server Time: 2026-06-10 10:20:00 UTC
Valid HTML 5 and Valid CSS