Marlin's sloped rear spring hangers

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Marlin's sloped rear spring hangers [Re: 4Crawler] #684114 01/09/06 12:30 AM

Joined: Apr 2003

Posts: 31

Pine Valley,Ca

Panamint Charlie Offline

Getting the Wheeling Fever

Thanks again. I think I found an answer to my problem. It looks like I'll move them in just a touch and weld in some flat stock to fill in the gap. I've got longer shackles so I'll try them before relocating the rear mounts.

I'll post how it turns out.

Entire Thread
Subject	Posted By	Posted
Marlin's sloped rear spring hangers	Panamint Charlie	01/08/06 09:50 PM
Re: Marlin's sloped rear spring hangers	4Crawler	01/08/06 10:07 PM
Re: Marlin's sloped rear spring hangers	Panamint Charlie	01/08/06 10:39 PM
Re: Marlin's sloped rear spring hangers	4Crawler	01/08/06 11:50 PM
Re: Marlin's sloped rear spring hangers	Panamint Charlie	01/09/06 12:30 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.544s Queries: 16 (3.542s) Memory: 0.6016 MB (Peak: 0.6346 MB) Data Comp: Off Server Time: 2026-06-10 01:51:07 UTC
Valid HTML 5 and Valid CSS