You'll be limited by the fill tube until the pan is off - or unless you unbolt the upper part of the tube at the bellhousing. The roll stopper is also a limiter. Once the fill tube, roll stopper and rear prop shaft are removed, you can move it as far as it'll go, but I don't see the need. If you try to jack it, be careful of the hard lines... I don't remember if they're attached to anything that might cause a crimp if they're not unbolted.

Frank

'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum