Valve Adjustment on Non Jet Valve Head

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Valve Adjustment on Non Jet Valve Head [Re: fasteddy] #684796 01/12/06 02:13 AM

Joined: Jan 2006

Posts: 35

Astoria, Oregon Coast

photoduo

Getting the Wheeling Fever

Thanks for specs and the refresher course in valve adjustment....I was very foggy on the details....I haven't adjusted rockers since my first car, a 1977 Toyota Pickup, bought it new for $3500 in 1977....I was thinking of going with the carter electric fuel pump and leaving the mech pump off.....Any suggestions on availability of a cover plate for the hole?...

Astoria, Oregon Coast
1987 Dodge Raider

Entire Thread
Subject	Posted By	Posted
Valve Adjustment on Non Jet Valve Head	photoduo	01/10/06 11:31 PM
Re: Valve Adjustment on Non Jet Valve Head	fasteddy	01/11/06 02:13 AM
Re: Valve Adjustment on Non Jet Valve Head	powerRam50	01/11/06 05:44 AM
Re: Valve Adjustment on Non Jet Valve Head	photoduo	01/12/06 02:13 AM
Re: Valve Adjustment on Non Jet Valve Head	fasteddy	01/12/06 03:09 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.475s Queries: 16 (3.473s) Memory: 0.6013 MB (Peak: 0.6343 MB) Data Comp: Off Server Time: 2026-06-23 13:18:38 UTC
Valid HTML 5 and Valid CSS