Valve Adjustment on Non Jet Valve Head

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Valve Adjustment on Non Jet Valve Head [Re: photoduo] #684797 01/12/06 03:09 PM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

A Starion has a tank mounted pump and a block off plate for the head hole. Any model, 84-89.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
Valve Adjustment on Non Jet Valve Head	photoduo	01/10/06 11:31 PM
Re: Valve Adjustment on Non Jet Valve Head	fasteddy	01/11/06 02:13 AM
Re: Valve Adjustment on Non Jet Valve Head	powerRam50	01/11/06 05:44 AM
Re: Valve Adjustment on Non Jet Valve Head	photoduo	01/12/06 02:13 AM
Re: Valve Adjustment on Non Jet Valve Head	fasteddy	01/12/06 03:09 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.550s Queries: 16 (3.547s) Memory: 0.6012 MB (Peak: 0.6341 MB) Data Comp: Off Server Time: 2026-06-22 17:31:37 UTC
Valid HTML 5 and Valid CSS