Quote
I am taking the axles off, and then have the boots put on professionally for about $15.00 ea. Well, that's the plan.


Since you would have to remove the entire axle shaft for this to work, I might reconsider this plan. Without dropping the entire front axle assembly, you will only be able to remove the outter half-shafts. That will allow the mechanic to replace only one boot, the other one would have to be installed when you re-install the half shaft.

I'd gladly spend an extra $50 to avoid having to drop the axle. Not that the Mecatechs are the only way to go, but the procedure is the same.

Good luck,
<img src="/forums/images/graemlins/cheers.gif" alt="" />Andre

Last edited by Starchild; 01/19/06 11:41 PM.
"SERENITY NOW!"

1995 Passport - TH700R4 - Twin-sticked Dana300 w/tera 4:1 - Leaf sprung SAS w/Dana 60/14BFF - 38.5x11 Boggers - DOR bumper w/ MM SE9500