remove 3.2l from 1997 Rodeo

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

remove 3.2l from 1997 Rodeo #685450 01/13/06 12:03 AM

Joined: Jan 2006

Posts: 10

Charlotte,NC

a1966f100

Need a Spot

Does anyone know if I can pull the engine from my 1997 Rodeo without removing the transmission and xfer case? It is a 4WD,3.2L SOHC, automatic transmission. Alldata says pull the transmission,then pull the engine. Thanks for any input!

19644speed

Entire Thread
Subject	Posted By	Posted
remove 3.2l from 1997 Rodeo	a1966f100	01/13/06 12:03 AM
Re: remove 3.2l from 1997 Rodeo	litnin	01/13/06 12:06 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.554s Queries: 15 (3.552s) Memory: 0.5940 MB (Peak: 0.6270 MB) Data Comp: Off Server Time: 2026-06-17 20:10:23 UTC
Valid HTML 5 and Valid CSS