don't know if you know this, but when pulling the springs, and you're taking apart the hangers, or just one side off, don't try to pound the pin all the way out on the spring end....because it doesn't come out, i didn't know this when doing my lift, and ended up jackin up the threds on one... <img src="/forums/images/graemlins/scared.gif" alt="" />..stupid noob. I though that maybe because mine were semi rusted and stock that they were just hard to get out....didn't know that they were attached/welded on one side of the hanger and then the other side slides off....figured they were set up like the after market hangers you see