Yep, either slap a few 2x4s in a square a bit larger than the base of the jack stands, gives mine 3" extra height.

[Linked Image]

But the trick is you don't have to be able to lift the tires off the ground, take them off then lower the frame onto the stands. Gets rid of about a foot of height. As is, with the droop I get with the Alcan springs, my axle will touch the ground with the frame on my boosted jack stands. I use the 6-ton HF jack stands.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code