Grinding noise when starting truck.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Grinding noise when starting truck. [Re: 4Crawler] #686004 01/15/06 08:20 PM

Joined: Nov 2004

Posts: 12

Manson

Need a Spot

If you remove the starter and all the teeth on the starter and the ring gear look good and no installation error, it may be the 1 way bearing in the starter. When these slip it sounds just like what you are describing. They are very spendy so gettng a reman unit may be cheaper.

Entire Thread
Subject	Posted By	Posted
Grinding noise when starting truck.	skoyboy35	01/14/06 07:55 AM
Re: Grinding noise when starting truck.	kewlynx	01/14/06 08:01 AM
Re: Grinding noise when starting truck.	Anonymous	01/15/06 10:10 AM
Re: Grinding noise when starting truck.	Anonymous	01/15/06 07:10 PM
Re: Grinding noise when starting truck.	4Crawler	01/15/06 07:58 PM
Re: Grinding noise when starting truck.	Manson	01/15/06 08:20 PM
Re: Grinding noise when starting truck.	355Camaro	01/19/06 01:50 AM
Re: Grinding noise when starting truck.	TimsToyo	01/19/06 03:48 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.531s Queries: 16 (3.529s) Memory: 0.6070 MB (Peak: 0.6400 MB) Data Comp: Off Server Time: 2026-06-10 09:57:03 UTC
Valid HTML 5 and Valid CSS