To clarify the 1/8" measurement. You are basically using the string to get the front tires pointing in the same direction as the rear tires. So, let's say your front tires stick out farther than the rear as was the case on my truck. You would tape the string to the front of the front tire and walk with it to the rear tire. Angle the string inwards until is just touches the rear (side) of the front tire. This is the direction that front tire is pointing. You can now measure the distance from the string to the front and rear side of the rear tire. If it measures the same, the front tire is pointing in the same direction as the rear tire. This is good. If the front tire is pointing in a bit, the string will be farther away from the rear side of the rear tire. That's where the 1/8" difference comes in. A slight bit of toe in means that string is a little farther from the rear side of the rear tire compared to the front. It's a 1/8" difference so if you are 1" away from the front side of the rear tire, you are 1 1/8" away from the rear side of that tire.

Hope that helps.

Frank


1994 4runner, 3.0, auto, 4.88's, 31's, BJ spacers, Coil spacers, air shocks, D-ring anchors, 4Crawler F/R swaybar discos.
www.sdori.com