They do tend to bind up a bit when you get to the max of the in/out adjustment but they will make it all the way, just need to apply more torque.

You wanna make sure they are close to symetrical. If the driver's side is at 10 o'clock, the passenger should be around 2 o'clock. Trust me, as long as both spindles are angling back, get the camber/toe right and don't worry about it.

When an alignment shop can't get the caster in spec, and on lifted trucks, prerunners especially, they rarely do, they just get the cross-caster close. Which, as said, means both spindles lean back as opposed to one forward and one back.

If you get the camber/toe in and cross caster as described, the truck should drive very very well.

Frank


1994 4runner, 3.0, auto, 4.88's, 31's, BJ spacers, Coil spacers, air shocks, D-ring anchors, 4Crawler F/R swaybar discos.
www.sdori.com