Rear transfer case output seal.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Rear transfer case output seal. #686106 01/14/06 08:40 PM

Joined: Oct 2005

Posts: 65

Utah

FarmerTed

Getting the Wheeling Fever

How hard is it to change the rear transfer case output seal? Mine is seeping a little bit. I'm changing the u-joints today so I'll already be in there.

1994 4x4 22RE

Entire Thread
Subject	Posted By	Posted
Rear transfer case output seal.	FarmerTed	01/14/06 08:40 PM
Re: Rear transfer case output seal.	4Crawler	01/14/06 10:03 PM
Re: Rear transfer case output seal.	SHAD	01/15/06 12:10 AM
Re: Rear transfer case output seal.	FarmerTed	01/15/06 01:03 AM
Re: Rear transfer case output seal.	4Crawler	01/15/06 01:15 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.535s Queries: 15 (3.533s) Memory: 0.6006 MB (Peak: 0.6336 MB) Data Comp: Off Server Time: 2026-06-20 08:16:24 UTC
Valid HTML 5 and Valid CSS