Rear transfer case output seal.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear transfer case output seal. [Re: FarmerTed] #686107 01/14/06 10:03 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

VEry easy, see the following page for pinion seal replacement, essentially the same thing, just no worries about pinion bearing preload, etc.:

http://www.4crawler.com/4x4/CheapTricks/PinionSeal/index.html

Only other tip is to apply a bit of silicone to the splines before reinstalling the flange to seal up that area.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Rear transfer case output seal.	FarmerTed	01/14/06 08:40 PM
Re: Rear transfer case output seal.	4Crawler	01/14/06 10:03 PM
Re: Rear transfer case output seal.	SHAD	01/15/06 12:10 AM
Re: Rear transfer case output seal.	FarmerTed	01/15/06 01:03 AM
Re: Rear transfer case output seal.	4Crawler	01/15/06 01:15 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.491s Queries: 16 (3.489s) Memory: 0.6014 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-06-20 13:02:14 UTC
Valid HTML 5 and Valid CSS