Rear transfer case output seal.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear transfer case output seal. [Re: 4Crawler] #686108 01/15/06 12:10 AM

Joined: Jun 2002

Posts: 1,698

South Burlington, VT

SHAD

Body Damage is Cool

30 mm impact socket and a 1/2 cordless impact makes short work of it. A seal puller tends to help more than the screw driver method to remove it.
Definately recommend getting one.

Last edited by SHAD; 01/15/06 12:11 AM.

86 Toyota 4 runner
35x12.5 BFG MT's, 4.56's XRC8 winch
My cardomain page

Entire Thread
Subject	Posted By	Posted
Rear transfer case output seal.	FarmerTed	01/14/06 08:40 PM
Re: Rear transfer case output seal.	4Crawler	01/14/06 10:03 PM
Re: Rear transfer case output seal.	SHAD	01/15/06 12:10 AM
Re: Rear transfer case output seal.	FarmerTed	01/15/06 01:03 AM
Re: Rear transfer case output seal.	4Crawler	01/15/06 01:15 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.576s Queries: 16 (6.574s) Memory: 0.6000 MB (Peak: 0.6330 MB) Data Comp: Off Server Time: 2026-06-20 11:51:53 UTC
Valid HTML 5 and Valid CSS