Newbie here; I posted back in mid-Dec that my recently acquired 88 Trooper had suffered from crankshaft pulley failure. Lots of sudden noise, and you could turn and move around the pulley by hand.
Got the part from Jerry Lemond, and finally today pulled the fan and radiator.
What was under the fan shroud? The crankshaft bolt! Boogered threads, maybe but not likely usable. Whut happened..
It get worse; the rubber portion of the balancer had not come apart, instead the pulley had broken, leaving a portion on the crank. As the bulk of it came off (I'm guessing here..), it clipped the cambelt sprocket, removing a 1-1/2x1/2" chunk.
That must have happened as I started and drove the crippled thing onto the trailer, as then it went to "no-start" mode trying to unload it.
Cambelt got broke in the process. So....assuming I get off the remainder of the crank pulley, then pull (?) off the cambelt sprocket..geez <img src="/forums/images/graemlins/frown.gif" alt="" />

So I need: crank bolt, cambelt sprocket, and do a search here for sprocket/belt alignment.
So much for using the starter technique for crank bolt removal....my Trooper did it for me!

I think I saved Jerry's e-mail and phone #.

Thanks in advance for any tips or feedback...I'm working w/o a manual, just this site for help.

Added: just ordered the Haynes manual...I think I'll need it.

Last edited by Mulerider; 01/16/06 09:24 PM.