Hey Dave, welcome... try puttin' the rig in 5th gear, parking brake engaged tightly (and maybe chock the wheels if necessary). Give some mighty pulls on the wrench and it should come loose. It's normal thread, righty tighty, lefty loosey. If it don't budge, others will tell you how to get it off by bumping the starter with the wrench wedged against the frame, but I've never had to do it that way.

The several times I've dont it, I haven't needed the puller, just wiggled it and it came right off.

Check out the search feature, remember to set the date range or you won't get many results, there's lots of info on doing the head job you are doing. One in particular is a post quite a while ago by RufusTheRam . Try searching on that username and see what you get... It was maybe 2 years ago.

Click Here, I found it for ya...

Good Luck!


C/YA!
Jeff
'88 Trooper
2DR LWB 4ZE1 5SP
bone stock DD