For many reasons my broke Trooper was ignored till today...when I last attempted repair, the broken timing gear refused to budge from the crank, for reasons unknown.
Today, using a different puller, all I managed was to break the remaining flange off of the sprocket ( yet the gear SHOULD just slide off).
Next was the Dremel tool; I cut a substantial groove in the gear, then used a chisel to successfully break off the gear..yeah!!
The key under the gear looks okay ( not much there)...the rest of the key (where the pully rides) is virtually gone.

It needs replacing...is it removable??? I just can't tell with what I have to see.

Clamping onto the good portion of the key with ViseGrips, then tapping upwards with a hammer yielded nothing.
Trying to catch the edge of the key on the nose of the crank also got me nowhere, but I will try that route again.
There just is not enough key left to properly hold the pulley..aagghh.
Any help is greatly appreciated.