|
|
new indy4x rock sliders (dial up beware)
#687211
01/18/06 03:19 PM
|
Joined: Jan 2005
Posts: 434
OP
Mudrunner
|
|
2002 Honda Passport. 3 inch Indy4x lift with 912 OME's. 265 75 BFG m/t's with a 3 inch body lift, safari rack, tube sliders, tube rear bumper, on-board air
|
|
Re: new indy4x rock sliders (dial up beware)
[Re: anubis]
#687212
01/18/06 05:22 PM
|
Joined: Apr 2002
Posts: 2,529
Roll Me Over
|
I like that look, I made a set a few months ago that's the spitting image, short of one less cross piece.
If they were pretty afforable, I probably would have just bought them. But I did enjoy making mine.
Nice Sliders Matt.
Joe
A gun in the hand is better than a cop on the phone.
98 Passport 33's, Supercharged, Calmini Bumper, rockbars, diff drops, Teralows, 4.77's, Aussie and ARB lockers, Safari snorkel, Optima red top.
|
|
Re: new indy4x rock sliders (dial up beware)
[Re: anubis]
#687213
01/18/06 08:50 PM
|
Joined: Sep 2002
Posts: 1,873
Body Damage is Cool
|
I do not get it: I see two different sorts of sliders, the ones on picture 3 are different from the sliders on pictures 1 & 2. This is puzzling.
Oleg Axiom 4WD 2004: OME shocks, 32" BFG Mudders, RockSliderz, OME929+2" spacers, Stinkyfab bent RE rear links, front ARB locker, rear No-Slip locker, DOR front axle lowering kit, custom middle section skid plate, IronMan torsion bars. Deceased Rodeo'02 4WD.
|
|
Re: new indy4x rock sliders (dial up beware)
[Re: holger]
#687214
01/18/06 08:56 PM
|
Joined: Feb 2004
Posts: 965
Rock Warrior
|
I do not get it: I see two different sorts of sliders I'm pretty sure it's just the angle of the last pic. Looks good <img src="/forums/images/graemlins/kewl.gif" alt="" /> I'm assuming these are weld on, and that Matt installed them for you since you're so close. They should serve you well. What size and type of tube did he use? <img src="/forums/images/graemlins/cheers.gif" alt="" />Andre
"SERENITY NOW!"
1995 Passport - TH700R4 - Twin-sticked Dana300 w/tera 4:1 - Leaf sprung SAS w/Dana 60/14BFF - 38.5x11 Boggers - DOR bumper w/ MM SE9500
|
|
Re: new indy4x rock sliders (dial up beware)
[Re: Starchild]
#687215
01/18/06 10:01 PM
|
Joined: Jan 2005
Posts: 434
OP
Mudrunner
|
all 3 are the same pics. just an angle difference. I belive it is all 2 inch tube. yea matt did install these for me.
2002 Honda Passport. 3 inch Indy4x lift with 912 OME's. 265 75 BFG m/t's with a 3 inch body lift, safari rack, tube sliders, tube rear bumper, on-board air
|
|
Re: new indy4x rock sliders (dial up beware)
[Re: Bigpoppax2]
#687216
01/19/06 04:08 PM
|
Joined: Sep 2002
Posts: 1,067
Body Damage is Cool
|
Looks great, Bryan. Maybe I should remove my box-shaped rocker bars and put on tubular ones like your's. It would match my tubular winch bumper.
Pete (P.S. Matt found a local guy here in Mechanicsville that sets up gears. My ARB locker is on the way)
'01 Rodeo Sport, 5 Speed Softie, Indy 4X rocker bars, OME 912's, Rancho 9000X's, Superwinch hubs, custom tube bumper with Warn 9000i , Flowmaster 50, TeraLow t-case gears, ARB front & rear lockers, TrXus MT's, Sway bar disconnects
|
|
Re: new indy4x rock sliders (dial up beware)
[Re: anubis]
#687217
01/20/06 03:26 PM
|
Joined: Jan 2000
Posts: 1,656
Body Damage is Cool
|
the tube on Brian's is all D.O.M..........the main rail is 2" and the rest is 1 3/4" there are 3 supports welded to the frame. here are a couple pics i took: ![[Linked Image]](http://www.independent4x.com/Images/RodeoTUBEbars.jpg)
'93 RS 3.2L - DD/trail build '97 7.3L Powerstroke - tow rig '71 FJ40 - V-8, nv4500, atlas, D60, 14B - current build Owner: http://www.INDEPENDENT4x.comm-f 9am-6pm EST. 804-550-0480
|
|
Re: new indy4x rock sliders (dial up beware)
[Re: matthew]
#687218
01/20/06 05:13 PM
|
Joined: May 2005
Posts: 172
Wheeler
|
Is the bottom tube unpluged? It looks open in one of the pics.
"Stubig" - '72 416.141 (U1100) Unimog "Sassy" - '05 KLR650 "Brody" - '04 Rodeo (It's my wife's, really) "Candy" - '02 TDI New Beetle (yes, a family of 4 fits inside) "Twinkie" - '72 Revcon 250 (converting from Olds 455 to 6.5L Diesel)
|
|
Re: new indy4x rock sliders (dial up beware)
[Re: FEF]
#687219
01/20/06 06:41 PM
|
Joined: Jan 2000
Posts: 1,656
Body Damage is Cool
|
nah.....it's capped.....just the pic.
i get pre-punched 3/16 tube caps and weld'em up <img src="/forums/images/graemlins/wink.gif" alt="" />
'93 RS 3.2L - DD/trail build '97 7.3L Powerstroke - tow rig '71 FJ40 - V-8, nv4500, atlas, D60, 14B - current build Owner: http://www.INDEPENDENT4x.comm-f 9am-6pm EST. 804-550-0480
|
|
Re: new indy4x rock sliders (dial up beware)
[Re: FEF]
#687220
01/25/06 09:21 PM
|
Joined: Mar 2001
Posts: 1,392
Body Damage is Cool
|
Is the bottom tube unpluged? It looks open in one of the pics. Glad I'm not the only one that thought that. They look nice. <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" />
George <img src="/forums/images/graemlins/nana.gif" alt="" /> 92 Rodeo XS 4x4 HomePage
|
|
|
|