3.0 ECU - necessary IO for diesel swap ??

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.0 ECU - necessary IO for diesel swap ?? [Re: Lee N] #687636 01/20/06 03:59 PM

Anonymous

Unregistered

As far as the ECU missing on this '94. Do I even need one plugged in for this swap?
Does it control anything I'll need??

Are the guage inputs direct 12v to the guages, or through the ECU as inputs?

thx

Entire Thread
Subject	Posted By	Posted
3.0 ECU - necessary IO for diesel swap ??	Anonymous	01/19/06 05:09 PM
Re: 3.0 ECU - necessary IO for diesel swap ??	Lee N	01/19/06 05:31 PM
Re: 3.0 ECU - necessary IO for diesel swap ??	x1racer	01/19/06 07:39 PM
Re: 3.0 ECU - necessary IO for diesel swap ??	PHIL_	01/20/06 07:17 AM
Re: 3.0 ECU - necessary IO for diesel swap ??	Anonymous	01/20/06 03:58 PM
Re: 3.0 ECU - necessary IO for diesel swap ??	Anonymous	01/20/06 03:59 PM
Re: 3.0 ECU - necessary IO for diesel swap ??	turboDIESELtrooper	01/26/06 07:47 PM
Re: 3.0 ECU - necessary IO for diesel swap ??	Lee N	01/27/06 04:38 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.577s Queries: 16 (3.574s) Memory: 0.6056 MB (Peak: 0.6386 MB) Data Comp: Off Server Time: 2026-06-22 21:10:46 UTC
Valid HTML 5 and Valid CSS