Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Source for Header Gaskets? #687742 01/19/06 09:37 PM
Joined: Dec 2004
Posts: 159
W
Whizkidder Offline OP
Wheeler
I'm getting ready to put a set of TRD headers on my 2001 3.4. Anyone out there have any suggestions on where I should go to get the best cylinder head to header gaskets?

Re: Source for Header Gaskets? [Re: Whizkidder] #687743 01/20/06 02:54 AM
Joined: Jun 2000
Posts: 766
Marc M Offline
Rock Warrior
The best gaskets I ever used for headers are the replacement metal manifold gaskets you would get at your local parts store. I put a medium coat of hi-temp sensor-safe copper rtv silicone on both sides, and tighten her up. Run it for a hundred miles or so and retighten.

Never had one leak.........

Marc


'06 Tacoma Dbl-cab, 4X4, V6, 6-spd, SR5/TRD....
'90 4Runner 4X4 SR5 5-Spd
'86 Shortbed 4X4 5-Spd, SAS'd ASAP
'82 Supra 5-Spd

Take your automatic and "Stick" it........

My Web Album in Progress

Moderated by  4x4Wire, Dandeman, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.005s) Memory: 0.5853 MB (Peak: 0.6330 MB) Data Comp: Off Server Time: 2026-06-21 03:51:13 UTC
Valid HTML 5 and Valid CSS