Thanks for the link. I think I might need a new VSV assembly. The blue valve tested at 40 OHMS, but the gray was at 28 OHMS. Is 28 OHMS still ok or do you think its bad. They don't give a range; they just say 42 OHMS is normal.
EDIT
Update: I was messing around with it again today and I put it in 4 HI with engine off then started it up. The 4wd indicator light did not come on. Cycled from 4hi to 4low and 2wd and the light stayed off. So now I'm still stuck in 2wd, but the indicator light is always off now.

Last edited by 96TrooperSE; 01/22/06 04:47 AM.
/1996 Trooper SE\
OME 912's w/2.5" spacers, Superwinch hubs, 265/75R16 Yokohama Geolanders (street), 34x10.50x15 Super Swamper LTB's, Indy4x HD Tie Rods, Indy4x Rock Sliders