Valve seals without pulling head?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Valve seals without pulling head? [Re: 800XL] #688245 01/21/06 01:27 PM

Joined: Dec 2000

Posts: 186

Harriman TN USA

Mike Bridges Offline

Wheeler

The valves won't move with the air unless you push them down. It depends on how much air you put in and the compressors capability to keep up with the demand. I have no problems with 100psi when doing them.

Entire Thread
Subject	Posted By	Posted
Valve seals without pulling head?	800XL	01/21/06 06:50 AM
Re: Valve seals without pulling head?	Mike Bridges	01/21/06 01:27 PM
Re: Valve seals without pulling head?	islandracer	01/21/06 03:12 PM
Re: Valve seals without pulling head?	800XL	01/21/06 05:43 PM
Re: Valve seals without pulling head?	pucci	01/22/06 03:29 AM
Re: Valve seals without pulling head?	800XL	02/23/06 07:01 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.536s Queries: 16 (3.534s) Memory: 0.6030 MB (Peak: 0.6360 MB) Data Comp: Off Server Time: 2026-05-30 13:50:14 UTC
Valid HTML 5 and Valid CSS