Valve seals without pulling head?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Valve seals without pulling head? [Re: 800XL] #688248 01/22/06 03:29 AM

Joined: Jun 2001

Posts: 846

pucci

Rock Warrior

I used the rope trick & it worked like a charm. definately use a magnet for removing the keepers and use little dabs of grease to make them stick to the stem upon reassembly.

2.6 Trooper
2.0 Impulse Turbo

Entire Thread
Subject	Posted By	Posted
Valve seals without pulling head?	800XL	01/21/06 06:50 AM
Re: Valve seals without pulling head?	Mike Bridges	01/21/06 01:27 PM
Re: Valve seals without pulling head?	islandracer	01/21/06 03:12 PM
Re: Valve seals without pulling head?	800XL	01/21/06 05:43 PM
Re: Valve seals without pulling head?	pucci	01/22/06 03:29 AM
Re: Valve seals without pulling head?	800XL	02/23/06 07:01 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.922s Queries: 16 (3.920s) Memory: 0.6016 MB (Peak: 0.6345 MB) Data Comp: Off Server Time: 2026-05-31 03:27:25 UTC
Valid HTML 5 and Valid CSS