Custom driveshaft shops?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Custom driveshaft shops? #68857 06/23/03 02:03 PM

Joined: Jan 2000

Posts: 10,859

Holly Springs, North Cackalack...

little_joe Offline

Former Admin

Hey Zach, I got my one-piece driveshaft from Steve at South Bay. I was grinding it hard Friday and it held up fine, the price was right, might wanna check with him.

BTW, cool carnage. <img border="0" title="" alt="[Smile]" src="images/icons/smile.gif" />

4x4Wire's Toyota Section
1995 FZJ80 LandCruiser - 3 locking diffs, +200k mi, JD HIR's, 285/75R16 Nitto TG's
Olde North State Cruisers

Entire Thread
Subject	Posted By	Posted
Custom driveshaft shops?	Zach	06/23/03 03:59 AM
Re: Custom driveshaft shops?	Anonymous	06/23/03 04:03 AM
Re: Custom driveshaft shops?	little_joe	06/23/03 02:03 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.501s Queries: 15 (3.499s) Memory: 0.5976 MB (Peak: 0.6305 MB) Data Comp: Off Server Time: 2026-06-14 04:19:32 UTC
Valid HTML 5 and Valid CSS