OBDII not working

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: OBDII not working [Re: ErikB] #689063 01/24/06 08:01 AM

Joined: Feb 2005

Posts: 1,489

Seattle

Jake97T

Body Damage is Cool

i had a serious voltage problem with my truck as well, it's a long shot but check and make sure you have a ground wire going from the battery to the body of the truck that leads to the driver side fender support. If this is missing youll get no more than 10V during idle.

97 FZJ80, Stock, Factory Lockers.

Entire Thread
Subject	Posted By	Posted
OBDII not working	weel	01/24/06 03:26 AM
Re: OBDII not working	ErikB	01/24/06 05:08 AM
Re: OBDII not working	Jake97T	01/24/06 08:01 AM
Re: OBDII not working	weel	01/24/06 08:35 AM
Re: OBDII not working	garym	01/24/06 04:26 PM
Re: OBDII not working	weel	01/24/06 11:28 PM
Re: OBDII not working	garym	01/25/06 04:06 AM
Re: OBDII not working	weel	01/25/06 07:27 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.658s Queries: 16 (3.836s) Memory: 0.6077 MB (Peak: 0.6407 MB) Data Comp: Off Server Time: 2026-11-03 02:07:58 UTC
Valid HTML 5 and Valid CSS