Bushings

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bushings [Re: kewlynx] #689693 02/05/06 06:47 PM

Joined: Oct 2005

Posts: 684

Wilton, Maine

DentedTacoma Offline

Rock Warrior

Did you guys have to do any cutting so the shifter would be abe to go into gear correctly? A lot of people say you cant go into 4hi if you dont do some adjustive cutting in the floor.

98' Toyota Tacoma SR5
Manual Xtra Cab, Slight Lift
Maine Rules!

Entire Thread
Subject	Posted By	Posted
Bushings	DentedTacoma	01/26/06 12:01 AM
Re: Bushings	DentedTacoma	01/30/06 04:01 AM
Re: Bushings	Mark in AZ	01/30/06 05:09 AM
Re: Bushings	Mark in AZ	01/30/06 05:14 AM
Re: Bushings	DentedTacoma	02/04/06 06:40 AM
Re: Bushings	shanef	02/04/06 06:58 AM
Re: Bushings	kewlynx	02/04/06 07:13 AM
Re: Bushings	DentedTacoma	02/05/06 06:47 PM
Re: Bushings	shanef	02/06/06 03:34 AM
Re: Bushings	DentedTacoma	02/06/06 05:50 AM
Re: Bushings	shanef	02/07/06 06:21 AM
Re: Bushings	DentedTacoma	02/20/06 07:49 PM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.917s Queries: 16 (3.915s) Memory: 0.6172 MB (Peak: 0.6502 MB) Data Comp: Off Server Time: 2026-06-03 16:17:15 UTC
Valid HTML 5 and Valid CSS