Timing cover bolt...broken

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Timing cover bolt...broken #692457 02/02/06 02:53 AM

Joined: Nov 2003

Posts: 557

Bellingham , WA

dewmtndew

Rock Warrior

While installing my timing cover the bottom left bolt, with the 14mm head, snapped inside the block. I dont think there is much if any sticking out of the block. What would be my best bet for getting this out without taking the timing cover off? Or would I be fine just leaving it as is?

erick

85 Pickup
33s, lift, EB cam, header, exhaust...

Entire Thread
Subject	Posted By	Posted
Timing cover bolt...broken	dewmtndew	02/02/06 02:53 AM
Re: Timing cover bolt...broken	kewlynx	02/02/06 02:57 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.350s Queries: 15 (3.348s) Memory: 0.5954 MB (Peak: 0.6284 MB) Data Comp: Off Server Time: 2026-05-25 18:50:21 UTC
Valid HTML 5 and Valid CSS