snapped brake something...need part ID

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: snapped brake something...need part ID [Re: hunterp] #693727 02/06/06 07:06 PM

Joined: Jan 2003

Posts: 1,355

Three Oaks, MI

Elbow_Greese Offline

Body Damage is Cool

To me it looks like part of the brake line.
Usually the lines go through the brackets and are just "clamped" to them using nuts.
Hard to tell if it's the hard line or flex line. Probably flex line though.

1986 Pickup extracab longbed "Woody edition"
SAS - 33's, 5.29's, lockright rear.

02 IS300 SportCross - my "DD"
94 2wd v6 extracab
04 Outback Wagon- wife's/family car

Entire Thread
Subject	Posted By	Posted
snapped brake something...need part ID	hunterp	02/06/06 06:50 PM
Re: snapped brake something...need part ID	Elbow_Greese	02/06/06 07:06 PM
Re: snapped brake something...need part ID	hunterp	02/06/06 08:32 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.884s Queries: 16 (3.881s) Memory: 0.5967 MB (Peak: 0.6297 MB) Data Comp: Off Server Time: 2026-11-02 07:38:47 UTC
Valid HTML 5 and Valid CSS