Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
SAS Axle Option #694094 02/07/06 09:45 PM
Joined: Oct 2005
Posts: 14
J
jmcentire Offline OP
Need a Spot
I have found a dana 44 front axle with a new set of warn hubs off a 76' Chevy for $150. Will this axle work for an SAS on a 96 rodeo without too much mod? Also how is the price? I plan on doing a SAS within a year or two so is it a good enough deal to buy now and store it until i do the SAS?


95.5 Rodeo 4x4 V6
3" DOR Lift
33x12.5x15 BFG A/Ts
Re: SAS Axle Option [Re: jmcentire] #694095 02/07/06 10:26 PM
Joined: Sep 2000
Posts: 4,277
RobG Offline
Roll Me Over
its a good axle (has flat top knuckles) for a good price ($150-200 is going rate in my area)... your biggest issue is its going to be the width... Chevy axle is a full width, 67-69"... as opposed to the commonly used Waggoneer D44 which is more like 62"

-Rob

Re: SAS Axle Option [Re: jmcentire] #694096 02/08/06 04:49 AM
Joined: Oct 2001
Posts: 945
maxwell417 Offline
Rock Warrior


Curt B 89RS Calmini Header Delta Cam 33x10.5 BFG MTs & 90 Trooper 3.4 v6, SAS D44 ARB/Hobart 5.38s 35s my pictures
Re: SAS Axle Option [Re: jmcentire] #694097 02/08/06 04:37 PM
Joined: Jun 2001
Posts: 1,365
sweater Offline
Body Damage is Cool
Quote
I have found a dana 44 front axle with a new set of warn hubs off a 76' Chevy for $150. Will this axle work for an SAS on a 96 rodeo without too much mod? Also how is the price? I plan on doing a SAS within a year or two so is it a good enough deal to buy now and store it until i do the SAS?

This is a good deal, I think. The only thing that you might want to do is to swap out the knuckles for flat-topped ones (I milled my passenger's side for the steering arm). I believe I used the knuckles off of a Scout or something - $90 for the pair, pulled for me at a local junk yard. You'll also want to go full-width in the rear, which usually means the matching 12-bolt from that application or a 14-bolt from something else.

Thanks for the shout-out, Curt... <img src="/forums/images/graemlins/cheers.gif" alt="" />

Once you go full width you never go back.
<img src="/forums/images/graemlins/smile.gif" alt="" />

- mike

Re: SAS Axle Option [Re: sweater] #694098 02/08/06 05:43 PM
Joined: Sep 2000
Posts: 4,277
RobG Offline
Roll Me Over
Quote
The only thing that you might want to do is to swap out the knuckles for flat-topped ones


All chevy's use a flat top already milled and drilled on the drivers side due to Chevy's steering arm design. the 74-76 years also used flat tops on the passenger side too.

This is the year you want if you want flat top knuckles to run a hi or crossover type steering.

-Rob

Re: SAS Axle Option [Re: RobG] #694099 02/08/06 05:44 PM
Joined: Jun 2001
Posts: 1,365
sweater Offline
Body Damage is Cool
Didn't know that - I originally got the center section (everything minus the knuckles) for free and had to purchase the knuckles seperately.

Go figure.

- mike








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.013s Queries: 15 (0.009s) Memory: 0.6110 MB (Peak: 0.6832 MB) Data Comp: Off Server Time: 2026-11-17 13:51:04 UTC
Valid HTML 5 and Valid CSS