they just seamed real loose fitting in the frame and in the springs.plus i had to cut some of them becouse they were to long to fit they stuck out but were touching in the middle if that makes since.there is also 2 diferant part numbers one for the uppers and one for the lowers but they all mesured the same when i got them,but had the correct #'s.i also had to cut the lip off the lowers but that was probaly from using the toyota shackles.and these were bought at a mitsu dealer.

87 dodge power ram 50,35" tires,5 1/2" total lift,4.6 gears,lockers front and rear,Rancho RS5000's,custom front bumper,custom rock sliders,cct extended diff breathers,75 amp alt(40 amp stock),thorely header,K&N,wheeled hard...