upper balljoints

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: upper balljoints [Re: smansfield] #694185 02/08/06 05:22 AM

Joined: Dec 2000

Posts: 760

Winnipeg, Manitoba, Canada

oldsub86

Rock Warrior

I think I also found it helpful to unbolt the front sway bar in order to get the lower a arm to drop far enough to pry out the upper ball joint. I ended up replacing the sway bar links too as they were about done.

Randy

1995 V6 SR5 5 speed 4X4 - 4Runner - dark blue

Entire Thread
Subject	Posted By	Posted
upper balljoints	smansfield	02/08/06 01:09 AM
Re: upper balljoints	allochris	02/08/06 01:45 AM
Re: upper balljoints	oldsub86	02/08/06 02:43 AM
Re: upper balljoints	smansfield	02/08/06 04:19 AM
Re: upper balljoints	Rusty Davis	02/08/06 04:29 AM
Re: upper balljoints	smansfield	02/08/06 04:43 AM
Re: upper balljoints	oldsub86	02/08/06 05:22 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.559s Queries: 16 (3.556s) Memory: 0.6032 MB (Peak: 0.6361 MB) Data Comp: Off Server Time: 2026-06-17 08:30:13 UTC
Valid HTML 5 and Valid CSS